H-IT Anchors CSK Galv 5 x 75mm CTN 400

Cost effective rapid fix, interference fit, fireproof hammer-in Countersunk H-IT Anchors for general fixing into solid masonry and concrete. Simple installation by hammering into a clean drill hole, countersunk head for a flush finish in timber battens, sheeting and general construction applications.

Features:

• Quantity: 400
• Anchor Diameter: 5mm
• Drill Size: 5mm
• Length: 75mm
• Effective Anchor Depth: 25mm
• Anchor Material: AISI 1040 Carbon Steel
• Finish:Mechanical Galvanised
• Minimum Spacing:50mm
• Head Diameter:11mm
• Recommended Tension Load (32MPa) :1.1kN

Whilst great care is taken in compiling technical data on Scrooz Fasteners products, all information, recommendations, or suggestions regarding the use of such products are made without guarantee, since the conditions of use are beyond our control. It is the customer’s responsibility to ensure that each product is fit for the purpose for which they intend for it to be used and that the conditions of use are suitable. All load data is presented inclusive of safety factors. Technical data sheets with further detail are available for all our products upon request, at any time.