Highload Deck Screws Ceramic 2000pc 8g x 50mm

High performance, high strength decking screws from our Razr range in a 2000pc bulk bundle for volume trade professionals and deck builders who want a tougher alternative to stainless steel but with similar corrosion protection.

A superb value bulk bundle that should be $162.75 if bought separately.
 

Our 8g x 50mm Highload Decking Screws 2000pc Bundle contains:

• 2000 8g x 50mm Highload Decking Screws
• 1 x RazrDeck Adjustable Auto Countersink 8g
• 2 x 50mm power driver bits

8g x 50mm Highload Decking Screws Tech Info:

• Quantity: 2000
• Screw Gauge: 8g
• Length: 50mm
• Thread Length: 33.5mm
• Threads Per Inch: 10 TPI
• Shank Diameter: 4.2mm
• Head Diameter: 7.5mm
• Head Height: 4mm
• Finish: Screw Armour Ceramic
• Material: Carbon Steel
• Driver Type: SQ2
• Point Type: T17 Wood Self Drill
• Head Type: Countersunk Head

HighLoad RazrDeck Decking Screws Overview

• Highload ceramic deck screws are triple heat treated carbon steel finished with a ceramic coating 1000 hour salt spray tested.
• Perfect for applications with hardwood joists where increased shank strength is needed. 50mm covers all boards up to 19mm thick.
• T17 self drill point and under-head ribs for fast install and a no2 square drive recess.
• Highload deck screw range provide roughly 4-5x the torsional strength of stainless steel.
• ScrewArmour coating lasts well over 6 times longer than any galvanised finish.
• A 'fit and forget' fastener that won't snap or suffer driver tear-out, can be used in any timber including ACQ and CCA pressure treated wood.

Highload is a fully hardened fastener and therefore doesn't flex as much as softer stainless steel, therefore we don't reccomend using them on decks which are liable to more than 8mm movement in any direction, RazrDeck Stainless is your best option here.

Find out more and watch our Highload screw strength demo below. For finished decks we do recommend pre-countersinking or driving them slower.

Scrooz RazrDeck Highload decking screws are manufactured specifically for customers looking for a tough, cost effective solution with great anti-corrosion properties, they are made from high grade carbon steel which is case hardened and then coated in our rock hard multi-layer 'baked on' ScrewArmour coating in an appealing silver finish, lasting well over 6 times longer than any galvanised finish and with twice the strength of stainless steel screws they are a 'fit and forget' fastener that won't snap or suffer driver tear-out, and you can use them anywhere in any timber including ACQ and CCA pressure treated wood.

So is ScrewArmour's anti-corrosion properties as good as stainless steel?  well the answer is no, there's no coating that will perform as good as stainless steel because the whole fastener is made from it, but it's pretty close and as a 1000hr salt spray tested coating it's far superior than any class of galvanised or other plate finish.

Click here to download the tech doc and find out more about ScrewArmour